Instagram X-twitter Linkedin

Login

Community
top design
logo

MWI-FOR-033

DYE PENETRANT INSPECTION EXAMINATION REPORT

Form Revision No. 3 Form Revision Date: 09/05/2025
side-logo
  • CLIENTUber Boat by Thames Clippers
  • PROJECTCyclone Clipper
  • PROCEDURE REFERENCEMWI_PRO_001
  • TEST LOCATIONTilbury Docks, Tilbury
  • NDT INSPECTORMartin Brettell
  • CSWIP/PCN LEVELCSWIP Level 2 - 640535
  • REPORT NOMWI_REP_1131
  • REPORT DATE07/05/2025
  • NDT DRAWING NO-
  • TEST DATE16/05/2025
  • NDT ZONEPort Hull Plating Around P-Bracket
EQUIPMENT SPECIFICATION AND EXAMINATION REQUIREMENTS
ACCEPTANCE CRITERIA
TESTING STANDARD
DNV Rules for classification of ships, Part 2, Chapter 2, Section 8, Table 10
BS EN ISO 3452-1: 2013
EQUIPMENT
MANUFACTURER
DESCRIPTION
SERIAL NO.
Liquid Penetrant SKL-SP2
Magnaflux
SKL – SP2
160904
Cleaner SKC-S
Magnaflux
SKS-S
160911
Developer SKD-S2
Magnaflux
SKD-S
161002
LED Inspection Light
NEBO
N/A
MWI_EQP_244
MATERIAL SPECIFICATION AND TESTING CONDITIONS
MATERIAL TESTED Aluminium
SURFACE CONDITION Smooth, as welded
MATERIAL TEMPERATURE Ambient
VIEWING CONDITION/LIGHT SOURCE Natural light and LED torch
MATERIAL THICKNESS (MM) 5mm, 6mm, 8mm and 10mm
TEST RESTRICTIONS None
WELDING PROCESS GMAW - Pulse
POST WELD HEAT TREATMENT None

Port Hull Repair

Port Hull Repair

Printed copies are uncontrolled Page 1 of © MWI 2025 This report contains sensitive information and is the property of MWI and cannot be distributed without written permission
top design
logo

MWI-FOR-033

DYE PENETRANT INSPECTION EXAMINATION REPORT

Form Revision No. 3 Form Revision Date: 09/05/2025
side-logo

Port Hull Repair

Port Hull Repair

Port Hull Repair

Port Hull Repair

Port Hull Repair

Port Hull Repair

Printed copies are uncontrolled Page 2 of © MWI 2025 This report contains sensitive information and is the property of MWI and cannot be distributed without written permission
top design
logo

MWI-FOR-033

DYE PENETRANT INSPECTION EXAMINATION REPORT

Form Revision No. 3 Form Revision Date: 09/05/2025
side-logo
  • DESCRIPTION 100% dye Penetrant Inspection of the port hull repair around the P-Bracket.
TABLE OF RESULTS
IDENTIFICATION
WELDER/WELDER ID.
TEST LENGTH
ACCEPTANCE
REMARKS
Port Hull Repair
MB-01
100%
Accepted
No defects identified.
ADDITIONAL COMMENTS
The identifications observed within the specified test zone comply with the acceptance criteria.

For and on behalf of Marine Welding and Inspection Services Ltd:

The statements and findings within this document are certified true and correct.


Welding Inspector: Martin Brettell

CSWIP Number: 640535

Signature:
Printed copies are uncontrolled Page 3 of © MWI 2025 This report contains sensitive information and is the property of MWI and cannot be distributed without written permission
top design
logo

MWI-FOR-033

DYE PENETRANT INSPECTION EXAMINATION REPORT

Form Revision No. 3 Form Revision Date: 09/05/2025
side-logo
  • CLIENTUber Boat by Thames Clippers
  • PROJECTCyclone Clipper
  • PROCEDURE REFERENCEMWI_PRO_001
  • TEST LOCATIONTilbury Docks, Tilbury
  • NDT INSPECTORMartin Brettell
  • CSWIP/PCN LEVELCSWIP Level 2 - 640535
  • REPORT NOMWI_REP_1131
  • REPORT DATE07/05/2025
  • NDT DRAWING NO-
  • TEST DATE16/05/2025
  • NDT ZONEPort Hull Plating Around P-Bracket
EQUIPMENT SPECIFICATION AND EXAMINATION REQUIREMENTS
ACCEPTANCE CRITERIA TESTING STANDARD
DNV Rules for classification of ships, Part 2, Chapter 2, Section 8, Table 10 BS EN ISO 3452-1: 2013
EQUIPMENT MANUFACTURER DESCRIPTION SERIAL NO.
Liquid Penetrant SKL-SP2 Magnaflux SKL – SP2 160904
Cleaner SKC-S Magnaflux SKS-S 160911
Developer SKD-S2 Magnaflux SKD-S 161002
LED Inspection Light NEBO N/A MWI_EQP_244
MATERIAL SPECIFICATION AND TESTING CONDITIONS
MATERIAL TESTED Aluminium
SURFACE CONDITION Smooth, as welded
MATERIAL TEMPERATURE Ambient
VIEWING CONDITION/LIGHT SOURCE Natural light and LED torch
MATERIAL THICKNESS (MM) 5mm, 6mm, 8mm and 10mm
TEST RESTRICTIONS None
WELDING PROCESS GMAW - Pulse
POST WELD HEAT TREATMENT None

Port Hull Repair

Port Hull Repair

Printed copies are uncontrolled Page 1 of © MWI 2025 This report contains sensitive information and is the property of MWI and cannot be distributed without written permission
top design
logo

MWI-FOR-033

DYE PENETRANT INSPECTION EXAMINATION REPORT

Form Revision No. 3 Form Revision Date: 09/05/2025
side-logo

Port Hull Repair

Port Hull Repair

Port Hull Repair

Port Hull Repair

Port Hull Repair

Port Hull Repair

Printed copies are uncontrolled Page 2 of © MWI 2025 This report contains sensitive information and is the property of MWI and cannot be distributed without written permission
top design
logo

MWI-FOR-033

DYE PENETRANT INSPECTION EXAMINATION REPORT

Form Revision No. 3 Form Revision Date: 09/05/2025
side-logo
  • DESCRIPTION 100% dye Penetrant Inspection of the port hull repair around the P-Bracket.
TABLE OF RESULTS
IDENTIFICATION WELDER/WELDER ID. TEST LENGTH ACCEPTANCE REMARKS
Port Hull Repair MB-01 100% Accepted No defects identified.
ADDITIONAL COMMENTS
The identifications observed within the specified test zone comply with the acceptance criteria.

For and on behalf of Marine Welding and Inspection Services Ltd:

The statements and findings within this document are certified true and correct.


Welding Inspector: Martin Brettell

CSWIP Number: 640535

Signature:
Printed copies are uncontrolled Page 3 of © MWI 2025 This report contains sensitive information and is the property of MWI and cannot be distributed without written permission

Delivering expert aluminum vessel maintenance, welding, and custom fabrication with unmatched precision and speed.

Quick Links

Social Media

Instagram X-twitter Linkedin

Get in Touch

© 2025 MWI & MWS. All rights reserved. Survey Register and all related content are the intellectual property of MWI & MWS.

Developed by Turn Up Technologies