Instagram X-twitter Linkedin
Login
AI MARINE WELDING AND INSPECTION SERVICES SHIP REPAIR AND WELDING SPECIALIST
top design
logo

MWI-FOR-033

DYE PENETRANT INSPECTION EXAMINATION REPORT

Form Revision No. 5 Form Revision Date: 02/04/2025
side-logo
  • CLIENTUber Boat by Thames Clippers
  • PROJECTTornado P-Bracket Repair
  • PROCEDURE REFERENCEMWI-PRO-001
  • TEST LOCATIONTilbury Docks
  • NDT INSPECTORMartin Brettell
  • CSWIP/PCN LEVELCSWIP Level 2 - 640535
  • REPORT NOMWI-REP-1178
  • REPORT DATE24/11/2025
  • NDT DRAWING NO-
  • TEST DATE22/11/2025
  • NDT ZONEPort & Starboard hull plating around P-Bracket
EQUIPMENT SPECIFICATION AND EXAMINATION REQUIREMENTS
ACCEPTANCE CRITERIA
TESTING STANDARD
DNV Rules for classification of ships, Part 2, Chapter 2, Section 8, Table 10
BS EN ISO 3452-1: 2013
EQUIPMENT
MANUFACTURER
DESCRIPTION
SERIAL NO.
Liquid Penetrant SKL-SP2
Magnaflux
SKL - SP2
160904
Cleaner SKC-S
Magnaflux
SKS-S
160911
Developer SKD-S2
Magnaflux
SKD-S
161002
LED Inspection Light
Nebo
N/A
MWI_EQP_244
MATERIAL SPECIFICATION AND TESTING CONDITIONS
MATERIAL TESTED Aluminium
SURFACE CONDITION Smooth, as welded
MATERIAL TEMPERATURE Ambient
VIEWING CONDITION/LIGHT SOURCE Natural light and LED torch
MATERIAL THICKNESS (MM) 6mm, 8mm and 10mm
TEST RESTRICTIONS None
WELDING PROCESS GMAW - Pulse
POST WELD HEAT TREATMENT None

Port P-Bracket

Port P-Bracket

Printed copies are uncontrolled Page 1 of © MWI 2026 This report contains sensitive information and is the property of MWI and cannot be distributed without written permission
top design
logo

MWI-FOR-033

DYE PENETRANT INSPECTION EXAMINATION REPORT

Form Revision No. 5 Form Revision Date: 02/04/2025
side-logo

Port P-Bracket

Port P-Bracket

Starboard P-Bracket

Starboard P-Bracket

Starboard P-Bracket

Starboard P-Bracket

Printed copies are uncontrolled Page 2 of © MWI 2026 This report contains sensitive information and is the property of MWI and cannot be distributed without written permission
top design
logo

MWI-FOR-033

DYE PENETRANT INSPECTION EXAMINATION REPORT

Form Revision No. 5 Form Revision Date: 02/04/2025
side-logo
  • DESCRIPTION 100% dye Penetrant Inspection of the port and starboard hull repair around the P-Bracket.
TABLE OF RESULTS
IDENTIFICATION
WELDER/WELDER ID.
TEST LENGTH
ACCEPTANCE
REMARKS
Port P-Bracket
MB-01/JF-01
100%
Accepted
No defects identified
Starboard P-Bracket
MB-01/JF-01
100%
Accepted
No defects identified
ADDITIONAL COMMENTS
The identifications observed within the specified test zone comply with the acceptance criteria.

For and on behalf of Marine Welding and Inspection Services Ltd:

The statements and findings within this document are certified true and correct.


Welding Inspector: Martin Brettell

CSWIP Number: 640535

Signature:
Printed copies are uncontrolled Page 3 of © MWI 2026 This report contains sensitive information and is the property of MWI and cannot be distributed without written permission
top design
logo

MWI-FOR-033

DYE PENETRANT INSPECTION EXAMINATION REPORT

Form Revision No. 5 Form Revision Date: 02/04/2025
side-logo
  • CLIENTUber Boat by Thames Clippers
  • PROJECTTornado P-Bracket Repair
  • PROCEDURE REFERENCEMWI-PRO-001
  • TEST LOCATIONTilbury Docks
  • NDT INSPECTORMartin Brettell
  • CSWIP/PCN LEVELCSWIP Level 2 - 640535
  • REPORT NOMWI-REP-1178
  • REPORT DATE24/11/2025
  • NDT DRAWING NO-
  • TEST DATE22/11/2025
  • NDT ZONEPort & Starboard hull plating around P-Bracket
EQUIPMENT SPECIFICATION AND EXAMINATION REQUIREMENTS
ACCEPTANCE CRITERIA TESTING STANDARD
DNV Rules for classification of ships, Part 2, Chapter 2, Section 8, Table 10 BS EN ISO 3452-1: 2013
EQUIPMENT MANUFACTURER DESCRIPTION SERIAL NO.
Liquid Penetrant SKL-SP2 Magnaflux SKL - SP2 160904
Cleaner SKC-S Magnaflux SKS-S 160911
Developer SKD-S2 Magnaflux SKD-S 161002
LED Inspection Light Nebo N/A MWI_EQP_244
MATERIAL SPECIFICATION AND TESTING CONDITIONS
MATERIAL TESTED Aluminium
SURFACE CONDITION Smooth, as welded
MATERIAL TEMPERATURE Ambient
VIEWING CONDITION/LIGHT SOURCE Natural light and LED torch
MATERIAL THICKNESS (MM) 6mm, 8mm and 10mm
TEST RESTRICTIONS None
WELDING PROCESS GMAW - Pulse
POST WELD HEAT TREATMENT None

Port P-Bracket

Port P-Bracket

Printed copies are uncontrolled Page 1 of © MWI 2026 This report contains sensitive information and is the property of MWI and cannot be distributed without written permission
top design
logo

MWI-FOR-033

DYE PENETRANT INSPECTION EXAMINATION REPORT

Form Revision No. 5 Form Revision Date: 02/04/2025
side-logo

Port P-Bracket

Port P-Bracket

Starboard P-Bracket

Starboard P-Bracket

Starboard P-Bracket

Starboard P-Bracket

Printed copies are uncontrolled Page 2 of © MWI 2026 This report contains sensitive information and is the property of MWI and cannot be distributed without written permission
top design
logo

MWI-FOR-033

DYE PENETRANT INSPECTION EXAMINATION REPORT

Form Revision No. 5 Form Revision Date: 02/04/2025
side-logo
  • DESCRIPTION 100% dye Penetrant Inspection of the port and starboard hull repair around the P-Bracket.
TABLE OF RESULTS
IDENTIFICATION WELDER/WELDER ID. TEST LENGTH ACCEPTANCE REMARKS
Port P-Bracket MB-01/JF-01 100% Accepted No defects identified
Starboard P-Bracket MB-01/JF-01 100% Accepted No defects identified
ADDITIONAL COMMENTS
The identifications observed within the specified test zone comply with the acceptance criteria.

For and on behalf of Marine Welding and Inspection Services Ltd:

The statements and findings within this document are certified true and correct.


Welding Inspector: Martin Brettell

CSWIP Number: 640535

Signature:
Printed copies are uncontrolled Page 3 of © MWI 2026 This report contains sensitive information and is the property of MWI and cannot be distributed without written permission